The Ball joint fitting is designed to be pressed on to any 4" tapered diameter opening for a quick and easy fi t. Ball joint prevents kinking of hose at the connection point which allows for great mobility. The opposite end accepts a 4” hose. A hose clamp is required on one end for proper connection

4” Threaded Quick Connect is designed to be pressed on to any 4” taper diameter opening for a quick and easy fit. The opposite end will accept a 4” hose by simply threading it on . No hose clamp required.

4” Quick Connect is designed to be pressed on to any 4” tapered diameter opening for a quick and easy fit, the opposite end accepts a 4” hose. A hose clamp is required on one end for proper connection.

4” to 2½” Threaded Quick Connect is designed to be pressed on to any 4” taper diameter opening for a quick and easy fit. The opposite end accepts a 2-1/2” hose by simply threading it on. No hose clamps are required.

Finally, a Blast Gate you can put directly on another fitting or eaven some machine ports. The 4" Quick Disconnect Blast Gate has a standard 4" opening which allows you to clamp a standard 4" hose around it. The other end is tapered to accept vitually any 4" fitting or port. The Quick Disconnect Blast Gate is an abolute must for any wood shop!

The threaded quick disconnect blast gate allows you to connect your 4" hose directly to the opening of one end of the blast gate without the use of a hose clamp. The blast gate has tapered quick connect opening on the opposite side for easy connection to dustport flanges.