Product List

Link to Woodworking Shows
Show Calendar

CA Residents Read-
Prop 65 Info

 

 

Drill Press Dust Collector and Accessories

 

Drill Press Dust Collector

Drill Press Dust Collector This is a great dust collection solution accessory for your drill press. If you use your drill press to drum sand, this is an absolute must. The hose is adjustable to any position, and it will stay right where you put it! You can add and remove the hose link sections to lengthen or shorten the hose for your table height. A new universal mount allows you to mount the hose anywhere on the drill press post. Add on nozzles are available for virtually any type of drill press job! The drill press dust collector fits most standard table and floor model drill presses. Some larger drill presses may require an extra link (sold separately) to extend the nozzle tip closer to the dust source. The drill press dust collector package comes with 12” of Rigid Flex- Lock Hose, 1ea. Universal drill press mount, 1ea. 2 1/2” hose adaptor, 1ea. tapered nozzle and 1 four inch steel hose clamp. Additional nozzles can be purchased separately. Note: when using nozzle tips D or E you will need at least one extra link to get closer to the dust source.
No. Description
Price
Quantity
351
Drill Press Dust Collector Kit
$39.99

product divider

Drill Press Dust Collector Accessories


 

Extra Hose and Nozzles

Note: when using nozzle tips D or E you will need at least one extra link to get closer to the dust source.

 

 

No. Description
Price
Quantity
471
(A) Universal Drill Press Mount
$16.99
348
(B) Taper Nozzles
$6.99

349

(C)-12" Rigid Flex Hose

$15.99

346
(D) Round Nozzles
$6.99
347
(E) Rectangle Nozzles
$6.99
348
(F) 2-1/2" Hose Adaptor
$5.99
344
(G) Extra Rigid Flex Hose Link
$1.99

product divider

Snap-In 2-1/2" Rigid Flex-Lock Adaptor

2-1/2" Rigid Flex-Lock Hose Fitting
Hose Not Included

 

The adaptor snaps right on to the Rigid Flex-Lock links witch then allows you to attach a 2 1/2" hose to it.

 

No. Description
Price
Quantity
345
Snap-In 2-1/2" Rigid Flex-Lock Adaptor
$5.99

product divider

Drill Press Dust Collector Adaptor Plate

Drill Press Adaptor Plate


 

The drill press dust collector adaptor plate is used for drill presses that are to small to allow the dust collection system to attach properly. It fits directly on to the motor mount to project the setup outward from the machine.

 

No. Description
Price
Quantity
343
Drill Press Adaptor Plate
$5.99

product divider

4" to 21/2" Reducer

4" to 2.5" Dust Collection Reducer

 

4” to 2½” allows you to reduce from a 4” hose down to a 2½” hose. Hose clamps are required for this type of connection or the small end accepts a standard 2¼” Shop- Vac® hose end. Only one hose clamp is required on the opposite 4” end for this type of connection.

 

No. Description
Price
Quantity
441
4" To 2 1/2" Dust Collection Reducer
$3.99

product divider

2 1/2" Splice Fitting


 

Splice fittings are used simply to connect two sections of dust collection hose together. You can use them on long runs of hose line or short runs of hose line. Hose clamps are required for proper connection . The 2-1/2” fitting will accept a 2-1/4” Shop-Vac® hose. This will allow you to join two Shop-Vac® hoses end to end with no hose clamps.

 

No. Description
Price
Quantity
409
2 1/2" Splice (Outer Diameters 2 1/2" x 2 1/2")
$2.99

product divider